Does anyone know how to fix the offset in the Material Design section? The dashed line does not extend across the length of the section and the depth is overlapping the graphic log section. I have tried to manually move the section in Report Design tab, but have had no luck. How do I fix this and what should the offset setting be?
Hi Ava,
There are so many variables you could have setup on your custom report(smart report where columns disappear and some widen to take up the space) , the quickest way for me to help you is to have you send me your files. I would need to get the library and the project. you can send them to me kirk.johnson@bentley.com
If you want some very general information. A static report (non smart report) the entities are just setup across the page (say starting left to right) so for example the depth column has a x value of 0 and a column width of 0.5. The next column would have an x value of 0.5 and a coulmn width (for example 0.3) so the third column would start at 0.8 (0.5 + 0.3) and then have a width and so on.
Here is the report design tutorial.
You may also find this helpful