The horizontal lines from header page 1 and 2 are over hanging. I don't believe it is the Header block, because I can remove the text and it doesnt affect the lines. The lines are overlaid 5 times... I can manually delete them in adobe. Any thoughts on this approach? I cant select the lines with the cursor either.
It is difficult to make any suggestions without seeing your gINT files. The picture you have is from your report design does not indicate how your report looks, what header it is etc.
If they are header lines, then they are in the header block. To edit the header block, you will need to go to Report Design>Blocks>Edit log Blocks> select the header name. Check the chapter dedicated to Blocks in the tutorial.
Check the Border Width value in Columns and Lines tab in the Log Report Properties (icon of hand holding a page). That should be setting the width of the header lines. Check the X coordinate and width of the log column entity on below and on the right side of page; X plus the width should match your Border width.