I was testing out how to use the tools on the right hand side. I drew some lines but they can't seem to be deleted. I've tried highlighting them or using the erase tool, but they don't go away.
Hi Christa,
It’s hard to say with a 100% certainty as the screen shot doesn’t show the whole report page, but the fact that the lines are in red likely indicate they were drawn in a block that is referenced in the main report. To edit the lines you would need to go into the block. There is usually a block name on the report in the same color .. Zoom all the way out in the report. Then hold down the ALT + click on the block name. Drill down in the block or blocks (you may have blocks with blocks) until the lines turn black and that would indicate they are editible from there you should be able to erase the lines.
For example : your report may be different but this is an example of a block name, Continue to drill down until the lines turn black there may be multiple blocks to drill into depending on where the actual lines were drawn.
Reference material about Blocks and how they work.
Hi Kirk, thank you for responding. I went through the steps to get to a point where the lines are black. Though I'm unable to highlight or delete them still. I'm not even able to edit the PROJECT NUMBER or NAME. I tried to double click on them to open their properties but nothing. It's a head scratcher.
From your screenshot it shows the block has the lock button toggled on . Toggle it off in this block and you should be able to delete