Hello,
Starting on 2nd page of my boring logs, GINT prints a gap at the bottom of the page which makes the boring logs per page shorter than on the 1st page.
Does anyone know who to get rid of that gap at the bottom?. I noticed the gap shows up starting in 2nd page onwards.
see attached.PDF
Pelelo,
Couple of suggestions:
1)Check the report properties and see what page size has been provided for page 2+.
2) Try giving depth log per page column a fixed depth for gINT to print each page.
Thanks Aparna.
the depth log per page is a fixed value (9.1 m).
Where do i check the size for page 2+?. See the file attached. In the report structure tab I can only enter a depth value for page 1PDF
I suspect your report template is set up with a shorter header on the second page so that you can fit more log on second and subsequent pages. However your body height is set to 7 for both first and second page so it prints the same amount of log on the second page even though there is room for more. Increase the body height for the second page to allow more log to print.
Thanks szang.
It worked well.