• Show monitored water levels for two standpipes from one borehole

    I have two installations in one borehole (1 & 2) and I want to show the max (highest) recorded groundwater level for each. I use the following text below within the discrete graphic but this always shows one value and not both. Like with water strikes…
  • How to get rid of You should update your software error message on SPT fence output in gINT?? We have the updated gINT software installed but still receiving this error message.

    Everytime we try to output a fence a BOLD message is displayed across the the preview / pdf that reads "You should update your software". After uninstalling and re installing the gINT software the message is still there. We are using version 10.01.00…
  • New to report designing - stumped on a couple things

    Hi, I'm not new to GiNT but I am new to report designing. I basically inherited a GiNT library and I would like to make some changes to the report design for borehole logs and create a report for fences. I have found the tutorials for report design…
  • Fence diagram: overlapping data

    Is there a way to have my PI and Cu overlap? See example below. Do I need to apply a callout?
  • Edit Line Thickness in Report Design >> Fences

    HELPPPP!!! How can I edit thickness of this line in Report Design >> Fences? I can only change the line thickness of the horizontal line: Tons of thanks!
  • How do you change a fence report layout to show a cross section and plan

    how do you change a page layout for the fence diagram to include a site map layout at the top and the cross section view at the bottom? This might be done easier if it is exported into CAD as I am mainly a CAD user however the engineering firm would like…
  • how do you add a borehole offset on a fence diagram? as it sits further up from the Control Line as it has a higher elevation and I would like to display that onto the cross section/fence diagram

    Hi I am fairly new to gINT, I ahve been using it for a week now so I have a basic understanding of the software and I understand how to enter and pace boreholes and surface lines onto the fence diagram, Howver I am wondering how do you add the offset…
  • Fence Diagram Site Map: How do I change data marker colours in my site map on fence diagram?

    I have recent BH data and Historic data and I would like to represent the Point ID with different colours e.g. red for recent green for historic. I am able to do this in the Site Maps under SM report properties>Data Rep>Data Marker Color Exp (output…
  • Trouble with an IFF Statement.

    I have the statement <<IIf(<<ANALYTICAL_RESULTS.Analyte>> = "VC",<<ANALYTICAL_RESULTS.RESULT>>,"False")>> I am using this as a conditional statement to show groundwater results for a certain analyze. This statement keeps resulting as False when I…
  • Copy fence report and variable legend missing

    I copied an existing fence report ('Stratigraphic Fenc - 11*17') and I've modified the fence itself - added another graphic column and some depth properties fields. I've changed nothing from the existing legend. But the legend in the new fence will not…
  • Can't reference fields from Alignments table in fence reports

    Hi, I'm changing layout of my fence report and I want to reference a text field from GINT_ALIGNMENTS table but fence report doesn't show any text after placing it in the report. I also tried to show the AlignID field with same result. Are these fields…
  • Having trouble getting a gINT fence report to output graphics

    Hello All, I am having issues getting a specific gINT log to output hatching. When I output the boring logs in this specific gINT file the outline of the log appears with the N-Values and layer divisions but the hatching does not appear. There is…
  • Conditional Format for N value in fence report

    Hello, I am trying to conditionally format a text vs depth entity used to display the calculated N value on my fence reports. I would like the N value to be bolded and underlined when the sample type is an MC and report as regular text when the sample…
  • Pulling a depth from table based on first depth with a value in a specific field

    Hello! I am building a fence report and I am trying to pull a depth from a table to use as the top depth to my vertical lines on a bar graph. The problem is that I cannot get the program to pull the minimum depth where there is data for the bar graph…
  • To get the code to find the Average for 'RQD' in core in Fence

    Dear Sir, I am using gINT V8i version software. we are doing Fence and borehole logs using this. Now I need to find the average for RQD and also this need to be displayed in the fence. I manged to display the RQD values in the fence, but unable to…
  • I just can't wrap my head around fence diagrams and why i cant get mine to work - no elevations etc found?

    I am trying to make a fence diagram for my logs to get a cross-section. I keep getting the same error and don't really know how to solve this? I cant find a guide anywhere to explain how to create these. When i try preview is comes up with no points…
  • Hi, I a new user gINT and I try to modify a logo company in the fence report. When I click in the report design I have the following error: "Could not open Data Template". Can anyone provide me the right way to modify the logo.

    Can anyone provide me the right way to modify the logo and why this is the reason for this message?
  • Inserting axis labels in fence diagrams

    I have manged to show results for dynamic probing on a fence report next to my borehole...… does anyone know how I create / insert a vertical and horizontal axis to show depth vs blows n/100mm? can this be done on a fence report? see picture below.
  • Change the print order of multiple entities at once while in the drawing function.

    In gINT, is it possible to change the print order of multiple entities at once? I would rather not have to click on a hundred different entities and go to the configure tab a hundred times. I realize I should have foreseen this in the report design tab…
  • Need help in specifying number of boring logs in a Fence Diagram Output

    Hello, Let's say I want to prepare fence diagram report(s) for a project with ten (10) borings. For each of these borings, I also want to show three data such as SPT-N, moisture content and unconfined compression. As you may understand, if I want to…
  • gINT work around: Application of <<G>> Glue Character on gINT fences to use for ground surface labels

    Thank you to Kirk who helped me with a work around to display surface labels at a specific XYZ on FENCES even when those labeled locations do not have depth related data. I had to use a <<G>> glue character to finish the job. In order to display surface…
  • How do I add Latitude and Longitude fields to my template and have them used to create a Fence plot/Cross Section?

    As the Title says. We have a fairly large project and I would like to create a Fence diagram that allows us to quickly compare elevations of the various different strata of soils. Our normal template does not have a Latitude and Longitude field in the…
  • Drawing entities by distance along a fence baseline

    Hi, I need to draw a rectangle under the fence data frame which would span the whole length of fence and place vertical lines and text at a specified position not by east and north coordinates but by distance along a baseline. Is there any way how to…
  • Why I cannot create surface terrain?

    when I click on icon "create terrain", it does not show any window. What should I do? Any help you could provide would be greatly appreciated. Thanks, Nartmongkhol
  • Text entities for boreholes at fixed vertical position in fence report

    Hi, I need to report various properties of each boreholes at fixed vertical placement under the data frame of fence report. How can this be achieved? Offset property seems to have no effect. Another question: is it possible to place a graph on fence…