I am curious if I can invert my depth scale in gINT Logs? I am creating a report where I want to display the height. For visual purposes I would like to invert my depth scale so that the largest 'depths' are displayed first, in the manner that height…

Hello all, I want to make an if statement that will say: "if the difference between depth and bottom values is less than 1, reduce the size of the text to 0.08 inches". I think this would go in the "Height Override Expression property of the section…

We've got a huge database of historical data on a project. There are several hundred holes. I've got a proposed surface for new construction. I'm trying to come up with a way to find out which holes do not extend far enough into the ground to reach the…

Hi All, I'm having some trouble trying to create a soilbore profile which had a stockpile on top. The stockpile was .45m high AGL, below it was natural ground which was augered to 0.3m BGL. Ideally it'd look something similar to the table below: …

We're using gINT 8.2.923. One of our Text Tables prints material properties such as PointID, Depth, and various types of field and laboratory data. In the Report Design for this Text Table, the Data Expression for Depth is <<Depth>>. At Output, the default…