• Vertical line through log plot

    I'm trying to present a dynamic constant on a log that is not related to depth. For example, I want to show calculated Ic from a CPT on a Plot vs Depth log and overlaying the cohesive/non-cohesive cut off as a vertical line, I need this line to run from…
  • 2nd Data Markers (Multiple Plots) do not show on plot

    Hello, I'm having trouble getting my 2nd Data Marker to show in the plot on the right. The first data (DCPT - triangles) shows but the second data (SPT - squares) does not. However, I can see that the program does recognize that there is a 2nd Data…
  • Surface plot over fence?

    Is there a way to get the surfaces to plot on top (in front) of the fences? Thanks
  • New to report designing - stumped on a couple things

    Hi, I'm not new to GiNT but I am new to report designing. I basically inherited a GiNT library and I would like to make some changes to the report design for borehole logs and create a report for fences. I have found the tutorials for report design…
  • Header Editing Lines Overhanging Log Border

    The horizontal lines from header page 1 and 2 are over hanging. I don't believe it is the Header block, because I can remove the text and it doesnt affect the lines. The lines are overlaid 5 times... I can manually delete them in adobe. Any thoughts on…
  • How to get elevation values to decrease with depth, not increase.

    Hi, in the output the elevation depths increase with depth, not decrease. Can someone please advise how to address this / instruct the report design ?
  • Fence Diagram Site Map: How do I change data marker colours in my site map on fence diagram?

    I have recent BH data and Historic data and I would like to represent the Point ID with different colours e.g. red for recent green for historic. I am able to do this in the Site Maps under SM report properties>Data Rep>Data Marker Color Exp (output…
  • How to add field for depth below stratum?

    Hi, I am new to gINT, my goal is to plot a graph that shows Data vs depth below stratum top (e.g. the ground comprises 0.2m Topsoil + 0.8m Clay and I want to plot the data at 1m bgl as 0.8m instead). In excel, I was able to obtain such depth by…
  • Can't reference fields from Alignments table in fence reports

    Hi, I'm changing layout of my fence report and I want to reference a text field from GINT_ALIGNMENTS table but fence report doesn't show any text after placing it in the report. I also tried to show the AlignID field with same result. Are these fields…
  • Conditional Format for N value in fence report

    Hello, I am trying to conditionally format a text vs depth entity used to display the calculated N value on my fence reports. I would like the N value to be bolded and underlined when the sample type is an MC and report as regular text when the sample…
  • Reset Report Design

    Hello I am new to gINT logs and trying to learn how to modify the report design to my liking. I changed so many thing in report header and column header that I cannot bring them back I uninstalled the application and reinstalled it again but all…
  • Design Lines on Logs y1, y2, x1, x2

    Hello, I am sure i am just not looking in the right places however I am trying to plot design lines from a table with 'depth top', 'depth bottom', 'Su top', 'Su Bottom', like so: Depth top Depth bottom Su top Su Bottom …
  • Need help with boring log design

    Hi Friends, I am new to gINT Professional and have been trying to learn how to customize boring logs e.g., add new columns or modify the existing logs to our company's taste. I have an excel file we have been using for years and now we are hoping…
  • Elevation overlapping at top of borehole log

    Hello all, I am new to gINT, and have a bit of trouble getting my elevation markers to show up as I want them. The photo on my left shows the overlapping issue that I have, and the photo on the right is what my log looked like earlier today. I…
  • Hi, I a new user gINT and I try to modify a logo company in the fence report. When I click in the report design I have the following error: "Could not open Data Template". Can anyone provide me the right way to modify the logo.

    Can anyone provide me the right way to modify the logo and why this is the reason for this message?
  • Report Design/Format Difference between gINT v.8.2 and v.10

    I used to work on gINT v.8.2 and now I got a new gINT v.10. I tried using the same project file (.gpj.) and library file (.glb) in the new gINT v.10, but the report format (e.g. font, margin of text box) is distorted from what I used to got from gINT…
  • How to Make Legend Point Colors Match Graph for Index Properties Vs Depth?

    I can't seem to figure out how to get the points in my legend to match the colors of the points on the graph. I used a solution I found from where someone else asked this question, and it changed the color, but as you can see in the picture, doing that…
  • LNAPL and DNAPL to Log

    I am making an internal block header trying to add the light non-aqueous phase liquid (LNAPL) level after drilling. I have tried to add "LNAPL" and "DNAPL" to my Water Level Event Library Data, but my associated text does not pull the data to the log…
  • Exclude Certain Data from Graph Report

    Hello, At our lab, we do a full sieve analysis or we can do just a #200 passing. I am trying to figure out a way to have only the full sieve analysis show up on the Grain Size Distribution graph, and for the results that only have the one #200 sieve…
  • Axis Labels

    I'm probably missing this and it's something obvious....but, can someone please tell me how to show more axis labels on the bottom of this graph? I know it's probably something simple I just keep overlooking. Here's a picture of where I roughly drew…
  • Shift the borehole (negative depth?)

    I have a few soil borings performed in open water. The depths recorded on the field log are from the mudline, and all associated lab testing is referencing depth from the mudline. Is there a quick way to show say 10 ft. of water above the mudline without…
  • Need help in specifying number of boring logs in a Fence Diagram Output

    Hello, Let's say I want to prepare fence diagram report(s) for a project with ten (10) borings. For each of these borings, I also want to show three data such as SPT-N, moisture content and unconfined compression. As you may understand, if I want to…
  • accidentally deleted a feature in the "report design" tab, gINT

    Hi, I was wondering if anyone had any suggestions for a simple way to retrieve/re add a feature that had been accidentally deleted from a log template on the "report design" tab? Thanks
  • Histogram

    Is there a way to plot two histogram graphs on one report? Ideally I would like to have one on top of the other, alternatively can I plot two data sets on the same graph?
  • Ground Water Elevation Arrow not Appearing on Report

    I am having trouble getting the ground water arrow to appear on my report. I have currently entered a ground surface elevation at 1295 ft in the Input tab. When I enter a number such as 2 into the "Ground Water Elevation" in the Input tab, it should…