• Correlation log among Net cone resistance data from multiple CPT points

    Hello, I'm trying to put separated qnet (net cone resistance) lines into same log with the data from <<CPT_READINGS>> table which has parent table is <<POINTS>> (meaning plot same data index from multiple CPT holes in to one paper without creating additional…
  • Vertical line through log plot

    I'm trying to present a dynamic constant on a log that is not related to depth. For example, I want to show calculated Ic from a CPT on a Plot vs Depth log and overlaying the cohesive/non-cohesive cut off as a vertical line, I need this line to run from…
  • 2nd Data Markers (Multiple Plots) do not show on plot

    Hello, I'm having trouble getting my 2nd Data Marker to show in the plot on the right. The first data (DCPT - triangles) shows but the second data (SPT - squares) does not. However, I can see that the program does recognize that there is a 2nd Data…
  • Need Help with output printing!

    Hi all, One more question. I am trying to export my logs and keep getting this error. Please help!
  • gINTCL trying to open with gINT Logs license instead of gINT Professional license

    My gINTCL has become associated with gINT Logs instead of gINT Professional, most likely an accidental "click" when i was switching back to pro from pro plus. Now, my gINTCL will not open as i do not have a license for gINT logs. Is there an easy fix…
  • Design Lines on Logs y1, y2, x1, x2

    Hello, I am sure i am just not looking in the right places however I am trying to plot design lines from a table with 'depth top', 'depth bottom', 'Su top', 'Su Bottom', like so: Depth top Depth bottom Su top Su Bottom …
  • Need help with boring log design

    Hi Friends, I am new to gINT Professional and have been trying to learn how to customize boring logs e.g., add new columns or modify the existing logs to our company's taste. I have an excel file we have been using for years and now we are hoping…
  • Elevation overlapping at top of borehole log

    Hello all, I am new to gINT, and have a bit of trouble getting my elevation markers to show up as I want them. The photo on my left shows the overlapping issue that I have, and the photo on the right is what my log looked like earlier today. I…
  • gINT Professional: Logs in Polish, using extended Latin characters come up as question marks

    Hi, We need to produce logs in Polish however extended Latin characters come up as question marks. Does anybody know how we can get around this? The symbols are not currently under data markers so stopping short of making our own is there any other…
  • Report Design issues - Truncating of my logs when exporting to PDF

    I have gINTCL version10.01.00.01 Following a Windows 10 update, my pdfs have been exporting truncated pdfs. Our internal IT group has downloaded, redownloaded, looked into Adobe and even updated and changed my versions of gINT but this continues to…
  • Shift the borehole (negative depth?)

    I have a few soil borings performed in open water. The depths recorded on the field log are from the mudline, and all associated lab testing is referencing depth from the mudline. Is there a quick way to show say 10 ft. of water above the mudline without…
  • How to add additional environmental column in gINT v8i pro?

    I've been trying for quite some time to add an additional column for environmental data. For example, I have PID and XRF data at the same depth, and am able to display it as below, but it gets hard to distinguish which is actually at which depth (PID…
  • need help on N value display "greater then"

    Hi everyone. I was inputting data on the N value under data tap, and I come across a data ">50" or "50+" does anyone know what ways to input this data so that it will show higher than 50 on a sample? Right now doesn't matter what I put it. That is other…
  • gINT: visualisation of multiple surface casings in boreholes

    Hi there, I am trying to display a bore log with two surface casings: -1 larger diameter surface casing is cemented to 6m -1 smaller diameter surface casing is cemented to 53m I would like to be able to visualise the cement in the gaps which are…
  • Report Design - Cursor Disappearing

    In some of my libraries, the cursor is not visiable on the work area of the Report Design Tab (I can only see it in the toolbar areas). I've tried the instructions below and it didn't work. Any solutions? Cursor Disappears in Report Design and Preview…
  • More than one Foreign PointID Expression

    Has anyone managed to use the Foreign PointID Expression for more than one associated exploratory hole. I've set up a field in a table with the point list I want to plot, seperated by commas. For example, BH01a has "BH01b, BH01c, BH01d" in that field…
  • Making Smart Logs

    I have been attempting to make smart logs for my test holes logs. I have followed both the instructions from the gINT design course as well as the instructions in the help menu and I can't get either of the examples to work. What am I missing?
  • Report Design - Log clean-up

    I have gINT Professional v08.30.03.135 I am attempting to clean-up the look of our logs and I can't figure out how to make the depth column join nicely with the lithology column for small layers of stratigraphy (see print screen attached). I only…
  • N-value and refusal display on boring logs

    I am using gINT V8i S s1 version 08.30.03.140. on MS windows 2007. I have a question regarding changing the reporting of N-values on boring log reports. The project manager wants to show an N-value for the sum of both the 2nd and 3rd intervals and…
  • Re: Well Completion Diagram Conundrum

    Not saying this is the "best" way but consider the following approach. The way I understand your Problem 1 is that you like the graphic output of a typical well installation set up in a log report. However, if you have a very long riser and want the…
  • Rounding '5'

    The general rule for rounding '5' my company uses is to round to the closest even number. ie 99.5 = 100 or 98.5 = 98 2.405 = 2.40 or 1.395 = 1.40 It appears that gINT always rounds '5' up. The only formulas I have been able to find even…
  • Re: Well Diagram Enhancements in Log Reports

    The way I handle this is as follows. Note that this is just one way and there are other approaches that might work better for you. My well table includes only 4 fields, depth, bottom depth, well graphic, and well notes (not a standard ags or gINT table…
  • Creating Links to PDF's of boring logs in Google Earth

    This is a copy of a post from the old gINT forum so some of the information may be a bit dated but most should still be applicable. It is relevant to some of the current discussions in the forum. Just wanted to relate some of my experiences in setting…