• Water level values and symbols not showing up, or showing up in the wrong place in soil probe logs.

    I tried the fix described in this post from March, 2014, which describes an almost identical issue, but it did not fix it. Anyone else run into this and have other ideas? I'm at a bit of a loss. Thank you!
  • Well Graphics Legend in gINT

    KMaughan asked: Has the ability to modify/suppress/clip the graphics in a variable legend been added to gINT? I'm interested in clipping; we have a variable legend for describing the materials used in well construction, but we don't need to see the hole…
  • Well Diagram Enhancements in Log Reports

    Patrick Spurgeon wrote : I need to show details above ground surface for the well diagram. The well that I am trying to represent has a riser that sticks up 3 feet above ground surface (ags) and the protective casing sticks up an additional 0.5 feet…
  • Re: Well Completion Diagram Conundrum

    Not saying this is the "best" way but consider the following approach. The way I understand your Problem 1 is that you like the graphic output of a typical well installation set up in a log report. However, if you have a very long riser and want the…
  • Re: Well Diagram Enhancements in Log Reports

    The way I handle this is as follows. Note that this is just one way and there are other approaches that might work better for you. My well table includes only 4 fields, depth, bottom depth, well graphic, and well notes (not a standard ags or gINT table…