• Discontinuity Fracture Symbols

    When creating a column for showing discontinuities in a log with line symbols I am using the "Discontinuity" options in template studio (Fig. 1) ^Figure 1. When using this option I can create a column that shows lines representing discontinuities…
  • OG Template Studio - Range Data Text Variable Font Size

    Hi all, Is it possible to create a strip where values print at different font sizes? In my head, I know that using Range Text Box will (probably) work, because it shrinks the text to fit the box defined by DepthTop/DepthBase, however I haven't set it…
  • Template Studio - Units per Page Limitations

    Hi all, I am encountering some limitations for the units per page on Template Studio. In the template setup area, I understand that the plot area must be in a whole number of millimeters, however Template Studio also requires that scale be a whole number…
  • Standpipe Diagram

    Good day! I am need assistance. When my "pipe height" is set to any value >0.0 m, the standpipe (SP) diagram extends above the borehole to this point. See screenshot below. I have attempted to adjust the pipe heights within Monitoring and Installations…
  • Cannot save changes to depth area settings on template

    I am unable to save changes to the depth area setting in the Template Setup menu of Template Studio. When I load the template in Template Studio, the settings are incorrect in the Template Setup menu are incorrect by default. I change the settings so…
  • Template Studio Suggestion: add Template Type column to allow filtering by type

    Template Studio Suggestion: add Template Type column to allow filtering by type. This would facilitate updating and managing templates. Do others think this would be helpful?
  • Cross section template symbol and axis title changes

    Is there a way to remove this symbol in the bottom left corner of cross section templates? It seems to be marking the bottom elevation of the section, but it looks like a water table symbol so I would like to remove it to avoid confusion. I would…
  • Template Studio section template into current Professional project

    I have created a new section template in Template Studio and want to use it in my current project in Professional but after saving the template to the configuration pack it's not showing as an option to use in professional, do I need to import the template…
  • How to change the SPT Blow Count appearance in OpenGround Cloud Professional and Template Studio

    When entering blow counts into the ASTM American Default configuration in OpenGround Cloud Professional where there is SPT refusal, the Blow Counts column auto-populates in feet (e.g., 10-20-50/0.25' or 50/0.167' ), this is also how it shows up when I…
  • Boundary Extensions

    Hello, I am working through Template Studio for Open Ground to set up our log templates and have run in to a slight issue. Currently the majority of our sample information (highlighted in red in the image below) is managed through a combination of bar…