• 3D Beam: wrong plot for bending moments

    Application PLAXIS 3D Issue status ✔ Solved First Affected Version PLAXIS 3D 2011.00 Found in Version PLAXIS 3D 2011.00 Fixed and Released in Version PLAXIS 3D 2012 Issue # 16625 Date created 27…
  • Structural results are not included in 2D2011.00's generated report

    Application PLAXIS 2D Issue status Open First Affected Version PLAXIS 2D 2011.00 Found in Version PLAXIS 2D 2011.00 Fixed and Released in Version Issue # 16437 Date created 19 January 2012 Date modified…
  • Volumetric strain in Updated Mesh not presented correctly

    Application PLAXIS 2D PLAXIS 3D Issue status Open First Affected Version PLAXIS 2D 2010 PLAXIS 3D 2011 Found in Version PLAXIS 2D 2010 PLAXIS 3D 2011 Fixed and Released in Version Issue # 16429 Date created…
  • Groundwater flow results after a consolidation analysis (EPP)

    Application PLAXIS 2D Issue status ✔ Solved First Affected Version PLAXIS 2D 2010.01 Found in Version PLAXIS 2D 2010.01 Fixed and Released in Version PLAXIS 2D 2011.00 Issue # 14637 Date created …
  • Possible data loss due to the Output report generator for user defined report folders

    Application PLAXIS 2D PLAXIS 3D Issue status ✔ Solved First Affected Version PLAXIS 2D 2010 PLAXIS 3D 2010 Found in Version PLAXIS 2D 2010 PLAXIS 3D 2010 Fixed and Released in Version PLAXIS 2D2012.00 PLAXIS 3D…
  • Bending moments of tunnels

    Application PLAXIS 2D Issue status ✔ Solved First Affected Version PLAXIS 2D 2010.01 Found in Version PLAXIS 2D 2010.01 Fixed and Released in Version PLAXIS 2D 2011.00 Issue # 14483 Date created …
  • Excess pore pressure in plate and interface are zero

    Application PLAXIS 2D Issue status ✔ Solved First Affected Version PLAXIS 2D 2010.01 Found in Version PLAXIS 2D 2010.01 Fixed and Released in Version PLAXIS 2D 2011.00 Issue # 14482 Date created …
  • Inspect intermediate step results in PLAXIS Output

    Application PLAXIS 2D PLAXIS 3D Version PLAXIS 2D PLAXIS 3D Date created 20 March 2019 Date modified 20 March 2019 PLAXIS phase calculations are divided into multiple steps to reach equilibrium for the defined phase…
  • Deactivated loads are still visible in PLAXIS Output

    Application PLAXIS 2D PLAXIS 3D Version PLAXIS 2D PLAXIS 3D Date created 22 January 2019 Date modified 22 January 2019 It is possible for projects to have various loads being deactivated in a calculation phase, effectively…
  • Unable to select structures or nodes

    Application PLAXIS 2D PLAXIS 3D Version PLAXIS 2D PLAXIS 3D Date created 30 May 2011 Date modified 24 October 2016 Date modified 24 October 2016 Applications PLAXIS 2D, PLAXIS 3D Problem description In Output…
  • PLAXIS Output Phase/Step object compatibility

    Application PLAXIS 2D PLAXIS 3D Version PLAXIS 2D PLAXIS 3D Date created 26 September 2017 Date modified 26 September 2017 Versions: PLAXIS 2D 2017, PLAXIS 3D 2017 Description With the released versions of PLAXIS…
  • need help on N value display "greater then"

    Hi everyone. I was inputting data on the N value under data tap, and I come across a data ">50" or "50+" does anyone know what ways to input this data so that it will show higher than 50 on a sample? Right now doesn't matter what I put it. That is other…
  • Ground Water Elevation Arrow not Appearing on Report

    I am having trouble getting the ground water arrow to appear on my report. I have currently entered a ground surface elevation at 1295 ft in the Input tab. When I enter a number such as 2 into the "Ground Water Elevation" in the Input tab, it should…
  • Text of Geology Unit in the Center of Stick

    Hi I've several input of the same geology unit 1 in the "Strata_Main". I'd like to reflect the geology unit in the output fences. However, when I changed the depth expression to try to centralise the geology unit text, (have also checked the option…
  • Preventing me from changing "Depth Units Page 1" temporarily in the Output screen -

    I need to change the "depth units on page 1" for one log, but when I try to do this from the Output screen (properties - report structure) that field is grayed out and I can't change it. On other templates I can change it, but this particular one doesn…
  • Log preview on the Output tab is not showing anything

    When previewing a log on the Output tab, absolutely nothing is produced. It just shows the blank blue screen, not even an outline of the log. It's forcing me to pdf the log each time to check things. Has anyone else run into this issue? Thank you!
  • Dgn logs output to one file

    Hi, I have a special project where I need to output several text information wrapped in rectangle polyline. I need to output this in dgn (or dxf) format but all in one file as there are a lot of Points in the database. Is there any way how to do it? My…
  • Creating Complete Subsurface Profile Using Fences in gINT

    I am very much interested in making a template to have a subsurface profile in gINT. I have a template that gives me a similar profile using output>fences, but that template only gives me the blow counts and not the complete lab test results, such as…
  • Automatic report selection based on Hole Type

    We'd like to output all of the SI for a project in order of chainage. Phil Wade has helped by explaining how to output logs in order using the sort box on output. How can we extend that functionality so that the output for TPs, BHs, RCs, CPTs, DPs are…
  • How to input multiple well installation details

    Good Afternoon I’m in a similar situation now as the person who originally posted the question (10 months ago) was back then, creating a newer version in gINT and getting used to some new features. But what do you do for multiple installations in the…
  • Targetting Specific Zones in Logs

    Hi there, I'm trying to generate some well logs, but above the screen zone is just open hole and I want to be able to display just the screen zone on my log. Is there a way this can be done without showing the entire hole depth? The screen zone is…
  • Text Table Output Sorted by Depth

    We're using gINT 8.2.923. One of our Text Tables prints material properties such as PointID, Depth, and various types of field and laboratory data. In the Report Design for this Text Table, the Data Expression for Depth is <<Depth>>. At Output, the default…
  • Bit map symbols appear in very low resolution in pdf output

    I recently changed the bitmap file that is used as a logo on our logs. The logo is inserted as a bitmap from the bitmap symbol table in the library. The logo is higher resolution than required and is sized in the report using the adjust height parameter…
  • gINT - Error Number 527

    Although we have a number of computers that have gINT installed, the following issue is only happening with one of them. My computer does not have the issue. So far we've only seen this on the Output tab. Clicking on the print, PDF or print preview…
  • Output doesn't seem to be using system resources correctly

    Hi all (again). This is an issue I've had for a number of years, and I just haven't bothered to report it, but the large job I'm working on now has meant that this has become a real pain.. We have a Core photo log, 2 landscape photos per page to output…