https://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-fileen-USTelligent Community 12https://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-fileWed, 10 Nov 2021 15:23:25 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fb802ba8-9bc5-4aa2-959d-eda65cc62e19Stephen Evasonhttps://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-file#commentsCurrent Revision posted to OpenGround Wiki by Stephen Evason on 11/10/2021 3:23:25 PM<br /> <p>The below example file was created as a starting level mapping file to import some gINT data into OpenGround.</p> <h2>Who is this mapping for?</h2> <p>It will import a number of basic fields from a gINT project file (GPJ) that is based on a UK gINT&nbsp;AGS 3.1 library and will import into any UK Standard configuration pack or a configuration pack derived from it. It can be used by any organisation and imported and used as needed. The mapping file can also be adjusted as required and used as a base for more advanced mapping if required.</p> <h2>What is Mapped?</h2> <p>The following tables and fields are mapped with this example mapping;</p> <table> <tbody> <tr> <td colspan="7">Project</td> </tr> <tr> <td>PROJ_ID</td> <td>PROJ_NAME</td> <td>PROJ_LOC</td> <td>PROJ_CLNT</td> <td>PROJ_CONT</td> <td>PROJ_ENG</td> <td>PROJ_MEMO</td> </tr> </tbody> </table> <p>Maps to the Project table in OpenGround.</p> <table> <tbody> <tr> <td colspan="15">POINT</td> </tr> <tr> <td>PointID</td> <td>HOLE_TYPE</td> <td>HOLE_NATE</td> <td>HOLE_NATN</td> <td>HOLE_GL</td> <td>HoleDepth</td> <td>HOLE_STAR</td> <td>HOLE_ENDD</td> <td>HOLE_REM</td> <td>HOLE_ETRV</td> <td>HOLE_NTRV</td> <td>HOLE_LTRV</td> <td>HOLE_LETT</td> <td>HOLE_LOCM</td> <td>HOLE_CLST</td> </tr> <tr> <td>PointID</td> <td>HoleDepth</td> <td>HOLE_TYPE</td> <td>HOLE_LOG</td> <td>HOLE_CREW</td> <td>HOLE_EXC</td> <td>HOLE_SHOR</td> <td>HOLE_STAB</td> <td>HOLE_DIML</td> <td colspan="6">HOLE_DIMW</td> </tr> <tr> <td>PointID</td> <td>HOLE_FDEP</td> <td>HOLE_ORNT</td> <td colspan="12">HOLE_INCL</td> </tr> </tbody> </table> <p>Maps to the LocationDetails, DepthRelatedExploratoryInformation and OrientationAndInclination tables respectively in OpenGround.</p> <table> <tbody> <tr> <td colspan="8">GEOL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>GEOL_BASE</td> <td>GEOL_DESC</td> <td>GEOL_GEOL</td> <td>GEOL_LEG</td> <td>GEOL_GEO2</td> <td>GEOL_STAT</td> </tr> </tbody> </table> <p>Maps to the StratumDetails table in OpenGround</p> <table> <tbody> <tr> <td colspan="17">SAMP</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>SAMP_REF</td> <td>SAMP_TYPE</td> <td>SAMP_BASE</td> <td>SAMP_UBLO</td> <td>SAMP_WDEP</td> <td>SAMP_DIA</td> <td>SAMP_DESC</td> <td>SAMP_REM</td> <td>SAMPE_DATE</td> <td>SAMP_TIME</td> <td>SAMP_BAR</td> <td>SAMP_WDEP</td> <td>SAMP_TEMP</td> <td>SAMP_PRES</td> <td>SAMP_FLOW</td> </tr> </tbody> </table> <p>Maps to the SampleInformation table in OpenGround.</p> <table> <tbody> <tr> <td colspan="4">BKFL</td> </tr> <tr> <td>PointID</td> <td>BKFL_BASE</td> <td>BKFL_SYMB</td> <td>Depth</td> </tr> </tbody> </table> <p>Maps to the BackillDetails table in OpenGround.</p> <table> <tbody> <tr> <td colspan="6">CHIS</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>CHIS_TO</td> <td>CHIS_TIME</td> <td>CHIS_TOOL</td> <td>CHIS_REM</td> </tr> </tbody> </table> <p>Maps to the Chiselling table in OpenGround.</p> <table> <tbody> <tr> <td colspan="4">DETL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>DETL_BASE</td> <td>DETL_DESC</td> </tr> </tbody> </table> <p>Maps to the StratumDetailDescriptions table in OpenGround</p> <table> <tbody> <tr> <td colspan="24">ISPT</td> </tr> <tr> <td>PointID</td> <td>ISPT_SWP</td> <td>Depth</td> <td>ISPT_SEAT</td> <td>ISPT_MAIN</td> <td>ISPT_NPEN</td> <td>ISPT_NVAL</td> <td>ISPT_REP</td> <td>ISPT_CAS</td> <td>ISPT_WAT</td> <td>ISPT_TYPE</td> <td>ISPT_REM</td> <td>ISPT_INC1</td> <td>ISPT_INC2</td> <td>ISPT_INC3</td> <td>ISPT_INC4</td> <td>ISPT_INC5</td> <td>ISPT_INC6</td> <td>ISPT_PEN1</td> <td>ISPT_PEN2</td> <td>ISPT_PEN3</td> <td>ISPT_PEN4</td> <td>ISPT_PEN5</td> <td>ISPT_PEN6</td> </tr> </tbody> </table> <p>Maps to the SPT table in OpenGround</p> <table> <tbody> <tr> <td colspan="6">WSTK</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>WSTK_CAS</td> <td>WSTK_DATE</td> <td>WSTK_TIME</td> <td>WSTK_SEAL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>WSTK_NMIN</td> <td>WSTK_POST</td> <td colspan="2">WSTK_FLOW</td> </tr> </tbody> </table> <p>Maps to the WaterStrikeGeneral and WaterStrikeDetails tables respectively in OpenGround</p> <table> <tbody> <tr> <td colspan="8">CORE</td> </tr> <tr> <td>PointID</td> <td>CORE_BOT</td> <td>Depth</td> <td>CORE_DIAM</td> <td>CORE_PREC</td> <td>CORE_REM</td> <td>CORE_RQD</td> <td>CORE_SREC</td> </tr> </tbody> </table> <p>Maps to the Coring table in OpenGround.</p> <table> <tbody> <tr> <td colspan="13">DPRG</td> </tr> <tr> <td>PointID</td> <td>DPRG_ANG</td> <td>DRPG_RMSS</td> <td>DPRG_CONE</td> <td>DPRG_DAMP</td> <td>DPRG_DROP</td> <td>DPRG_MASS</td> <td>DPRG_REM</td> <td>DPRG_ROD</td> <td></td> <td>DPRG_TEST</td> <td>DPRG_TIP</td> <td>DPRG_TYPE</td> </tr> </tbody> </table> <p>Maps to the DynamicProbeGeneral table in OpenGround.</p> <table> <tbody> <tr> <td colspan="7">DPRB</td> </tr> <tr> <td>PointID</td> <td>DPRB_BLOW</td> <td>DPRB_DEL</td> <td>Depth</td> <td>DPRB_INC</td> <td>DPRB_REM</td> <td>DPRB_TORQ</td> </tr> </tbody> </table> <h2>Notes and Special Cases</h2> <p>In this mapping, the main majority of mapping is a simple 1 to 1 for each table and field. However, there are some exceptions which are worth noting;</p> <ul> <li>POINT <ul> <li>The Point table gets split into 3 different tables in OpenGround; LocationDetails, DepthRelatedExploratoryInformation and OrientationandInclination.</li> <li>A special function is used to extract the start and end dates in the correct format.</li> <li><span>DepthRelatedExploratoryInformation and OrientationandInclination - A constant value of 0 is entered for the depth top to simulate the top of the hole.</span></li> </ul> </li> <li><span>SAMP</span> <ul> <li><span>SAMP_DATE and SAMP_TIME are concatenated together if there is a SAMP_TIME record, else a value of 00:00 is used for the time.</span></li> </ul> </li> <li><span>WSTK</span> <ul> <li><span>WSTK_DATE and WSTK_TIME are concatenated together if there is a WSTK_TIME record, else a value of 00:00 is used for the time.</span></li> </ul> </li> <li><span>DPRG and DPRB</span> <ul> <li><span>TestNumber is a required field in OpenGround due to this being a key field, therefore a value of null is entered in the mapping in order to facilitate an import.</span></li> </ul> </li> </ul> <h2><span>How To Import</span></h2> <p><span>A gINT import mapping file can be imported into a configuration pack and be available for use in all projects on that configuration pack by following these steps;</span></p> <ol> <li><span>Open OpenGround Professional and select the System - Configuration Packs<br /><img alt=" " src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636551318372v1.png" /><br /></span></li> <li><span>Select the required configuration pack in the grid, then select Configuration Tools - Transfer Mapping -&nbsp;Upload Import XML Mapping<br /><img alt=" " src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636551615834v2.png" /><br /></span></li> <li><span>Select the File Format to be gINT, enter a name for the mapping and browse through the mapping file, then select iimport.<br /><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636557869366v2.png" alt=" " /><br /><br /></span></li> </ol> <p><span>The mapping will then be available when importing data into a project in OpenGround Professional.</span></p> <h2><span>Download the File</span></h2> <p><span><a href="https://communities.bentley.com/cfs-file/__key/communityserver-wikis-components-files/00-00-00-06-06/UK-GINT-Example-File.xml">communities.bentley.com/.../UK-GINT-Example-File.xml</a></span></p> <p><span>Note, click on the UK Gint Example File.xml link at the top right of the preview to download the file.</span></p><div style="clear:both;"></div> <div style="font-size: 90%;">Tags: import, gINT</div> https://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-file/revision/2Wed, 10 Nov 2021 14:03:36 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fb802ba8-9bc5-4aa2-959d-eda65cc62e19Stephen Evasonhttps://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-file#commentsRevision 2 posted to OpenGround Wiki by Stephen Evason on 11/10/2021 2:03:36 PM<br /> <p>The below example file was created as a starting level mapping file to import some gINT data into OpenGround.</p> <h2>Who is this mapping for?</h2> <p>It will import a number of basic fields from a gINT project file (GPJ) that is based on a UK gINT&nbsp;AGS 3.1 library and will import into any UK Standard configuration pack or a configuration pack derived from it. It can be used by any organisation and imported and used as needed. The mapping file can also be adjusted as required and used as a base for more advanced mapping if required.</p> <h2>What is Mapped?</h2> <p>The following tables and fields are mapped with this example mapping;</p> <table> <tbody> <tr> <td colspan="7">Project</td> </tr> <tr> <td>PROJ_ID</td> <td>PROJ_NAME</td> <td>PROJ_LOC</td> <td>PROJ_CLNT</td> <td>PROJ_CONT</td> <td>PROJ_ENG</td> <td>PROJ_MEMO</td> </tr> </tbody> </table> <p>Maps to the Project table in OpenGround.</p> <table> <tbody> <tr> <td colspan="15">POINT</td> </tr> <tr> <td>PointID</td> <td>HOLE_TYPE</td> <td>HOLE_NATE</td> <td>HOLE_NATN</td> <td>HOLE_GL</td> <td>HoleDepth</td> <td>HOLE_STAR</td> <td>HOLE_ENDD</td> <td>HOLE_REM</td> <td>HOLE_ETRV</td> <td>HOLE_NTRV</td> <td>HOLE_LTRV</td> <td>HOLE_LETT</td> <td>HOLE_LOCM</td> <td>HOLE_CLST</td> </tr> <tr> <td>PointID</td> <td>HoleDepth</td> <td>HOLE_TYPE</td> <td>HOLE_LOG</td> <td>HOLE_CREW</td> <td>HOLE_EXC</td> <td>HOLE_SHOR</td> <td>HOLE_STAB</td> <td>HOLE_DIML</td> <td colspan="6">HOLE_DIMW</td> </tr> <tr> <td>PointID</td> <td>HOLE_FDEP</td> <td>HOLE_ORNT</td> <td colspan="12">HOLE_INCL</td> </tr> </tbody> </table> <p>Maps to the LocationDetails, DepthRelatedExploratoryInformation and OrientationAndInclination tables respectively in OpenGround.</p> <table> <tbody> <tr> <td colspan="8">GEOL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>GEOL_BASE</td> <td>GEOL_DESC</td> <td>GEOL_GEOL</td> <td>GEOL_LEG</td> <td>GEOL_GEO2</td> <td>GEOL_STAT</td> </tr> </tbody> </table> <p>Maps to the StratumDetails table in OpenGround</p> <table> <tbody> <tr> <td colspan="17">SAMP</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>SAMP_REF</td> <td>SAMP_TYPE</td> <td>SAMP_BASE</td> <td>SAMP_UBLO</td> <td>SAMP_WDEP</td> <td>SAMP_DIA</td> <td>SAMP_DESC</td> <td>SAMP_REM</td> <td>SAMPE_DATE</td> <td>SAMP_TIME</td> <td>SAMP_BAR</td> <td>SAMP_WDEP</td> <td>SAMP_TEMP</td> <td>SAMP_PRES</td> <td>SAMP_FLOW</td> </tr> </tbody> </table> <p>Maps to the SampleInformation table in OpenGround.</p> <table> <tbody> <tr> <td colspan="4">BKFL</td> </tr> <tr> <td>PointID</td> <td>BKFL_BASE</td> <td>BKFL_SYMB</td> <td>Depth</td> </tr> </tbody> </table> <p>Maps to the BackillDetails table in OpenGround.</p> <table> <tbody> <tr> <td colspan="6">CHIS</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>CHIS_TO</td> <td>CHIS_TIME</td> <td>CHIS_TOOL</td> <td>CHIS_REM</td> </tr> </tbody> </table> <p>Maps to the Chiselling table in OpenGround.</p> <table> <tbody> <tr> <td colspan="4">DETL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>DETL_BASE</td> <td>DETL_DESC</td> </tr> </tbody> </table> <p>Maps to the StratumDetailDescriptions table in OpenGround</p> <table> <tbody> <tr> <td colspan="24">ISPT</td> </tr> <tr> <td>PointID</td> <td>ISPT_SWP</td> <td>Depth</td> <td>ISPT_SEAT</td> <td>ISPT_MAIN</td> <td>ISPT_NPEN</td> <td>ISPT_NVAL</td> <td>ISPT_REP</td> <td>ISPT_CAS</td> <td>ISPT_WAT</td> <td>ISPT_TYPE</td> <td>ISPT_REM</td> <td>ISPT_INC1</td> <td>ISPT_INC2</td> <td>ISPT_INC3</td> <td>ISPT_INC4</td> <td>ISPT_INC5</td> <td>ISPT_INC6</td> <td>ISPT_PEN1</td> <td>ISPT_PEN2</td> <td>ISPT_PEN3</td> <td>ISPT_PEN4</td> <td>ISPT_PEN5</td> <td>ISPT_PEN6</td> </tr> </tbody> </table> <p>Maps to the SPT table in OpenGround</p> <table> <tbody> <tr> <td colspan="6">WSTK</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>WSTK_CAS</td> <td>WSTK_DATE</td> <td>WSTK_TIME</td> <td>WSTK_SEAL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>WSTK_NMIN</td> <td>WSTK_POST</td> <td colspan="2">WSTK_FLOW</td> </tr> </tbody> </table> <p>Maps to the WaterStrikeGeneral and WaterStrikeDetails tables respectively in OpenGround</p> <table> <tbody> <tr> <td colspan="8">CORE</td> </tr> <tr> <td>PointID</td> <td>CORE_BOT</td> <td>Depth</td> <td>CORE_DIAM</td> <td>CORE_PREC</td> <td>CORE_REM</td> <td>CORE_RQD</td> <td>CORE_SREC</td> </tr> </tbody> </table> <p>Maps to the Coring table in OpenGround.</p> <table> <tbody> <tr> <td colspan="13">DPRG</td> </tr> <tr> <td>PointID</td> <td>DPRG_ANG</td> <td>DRPG_RMSS</td> <td>DPRG_CONE</td> <td>DPRG_DAMP</td> <td>DPRG_DROP</td> <td>DPRG_MASS</td> <td>DPRG_REM</td> <td>DPRG_ROD</td> <td></td> <td>DPRG_TEST</td> <td>DPRG_TIP</td> <td>DPRG_TYPE</td> </tr> </tbody> </table> <p>Maps to the DynamicProbeGeneral table in OpenGround.</p> <table> <tbody> <tr> <td colspan="7">DPRB</td> </tr> <tr> <td>PointID</td> <td>DPRB_BLOW</td> <td>DPRB_DEL</td> <td>Depth</td> <td>DPRB_INC</td> <td>DPRB_REM</td> <td>DPRB_TORQ</td> </tr> </tbody> </table> <h2>Notes and Special Cases</h2> <p>In this mapping, the main majority of mapping is a simple 1 to 1 for each table and field. However, there are some exceptions which are worth noting;</p> <ul> <li>POINT <ul> <li>The Point table gets split into 3 different tables in OpenGround; LocationDetails, DepthRelatedExploratoryInformation and OrientationandInclination.</li> <li>A special function is used to extract the start and end dates in the correct format.</li> <li><span>DepthRelatedExploratoryInformation and OrientationandInclination - A constant value of 0 is entered for the depth top to simulate the top of the hole.</span></li> </ul> </li> <li><span>SAMP</span> <ul> <li><span>SAMP_DATE and SAMP_TIME are concatenated together if there is a SAMP_TIME record, else a value of 00:00 is used for the time.</span></li> </ul> </li> <li><span>WSTK</span> <ul> <li><span>WSTK_DATE and WSTK_TIME are concatenated together if there is a WSTK_TIME record, else a value of 00:00 is used for the time.</span></li> </ul> </li> <li><span>DPRG and DPRB</span> <ul> <li><span>TestNumber is a required field in OpenGround due to this being a key field, therefore a value of null is entered in the mapping in order to facilitate an import.</span></li> </ul> </li> </ul> <h2><span>How To Import</span></h2> <p><span>A gINT import mapping file can be imported into a configuration pack and be available for use in all projects on that configuration pack by following these steps;</span></p> <ol> <li><span>Open OpenGround Professional and select the System - Configuration Packs<br /><img alt=" " src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636551318372v1.png" /><br /></span></li> <li><span>Select the required configuration pack in the grid, then select Configuration Tools - Transfer Mapping -&nbsp;Upload Import XML Mapping<br /><img alt=" " src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636551615834v2.png" /><br /></span></li> <li><span>Select the File Format to be gINT, enter a name for the mapping and browse through the mapping file, then select iimport.<br /><img alt=" " src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636552016902v3.png" /><br /><br /></span></li> </ol> <p><span>The mapping will then be available when importing data into a project in OpenGround Professional.</span></p> <h2><span>Download the File</span></h2> <p><span><a href="https://communities.bentley.com/cfs-file/__key/communityserver-wikis-components-files/00-00-00-06-06/UK-GINT-Example-File.xml">communities.bentley.com/.../UK-GINT-Example-File.xml</a></span></p> <p><span>Note, click on the UK Gint Example File.xml link at the top right of the preview to download the file.</span></p><div style="clear:both;"></div> <div style="font-size: 90%;">Tags: import, gINT</div> https://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-file/revision/1Wed, 10 Nov 2021 13:48:25 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fb802ba8-9bc5-4aa2-959d-eda65cc62e19Stephen Evasonhttps://communities.bentley.com/products/geotechnical1/w/openground-wiki/56803/uk-example-file#commentsRevision 1 posted to OpenGround Wiki by Stephen Evason on 11/10/2021 1:48:25 PM<br /> <p>The below example file was created as a starting level mapping file to import some gINT data into OpenGround.</p> <h2>Who is this mapping for?</h2> <p>It will import a number of basic fields from a gINT project file (GPJ) that is based on a UK gINT&nbsp;AGS 3.1 library and will import into any UK Standard configuration pack or a configuration pack derived from it. It can be used by any organisation and imported and used as needed. The mapping file can also be adjusted as required and used as a base for more advanced mapping if required.</p> <h2>What is Mapped?</h2> <p>The following tables and fields are mapped with this example mapping;</p> <table> <tbody> <tr> <td colspan="7">Project</td> </tr> <tr> <td>PROJ_ID</td> <td>PROJ_NAME</td> <td>PROJ_LOC</td> <td>PROJ_CLNT</td> <td>PROJ_CONT</td> <td>PROJ_ENG</td> <td>PROJ_MEMO</td> </tr> </tbody> </table> <p>Maps to the Project table in OpenGround.</p> <table> <tbody> <tr> <td colspan="15">POINT</td> </tr> <tr> <td>PointID</td> <td>HOLE_TYPE</td> <td>HOLE_NATE</td> <td>HOLE_NATN</td> <td>HOLE_GL</td> <td>HoleDepth</td> <td>HOLE_STAR</td> <td>HOLE_ENDD</td> <td>HOLE_REM</td> <td>HOLE_ETRV</td> <td>HOLE_NTRV</td> <td>HOLE_LTRV</td> <td>HOLE_LETT</td> <td>HOLE_LOCM</td> <td>HOLE_CLST</td> </tr> <tr> <td>PointID</td> <td>HoleDepth</td> <td>HOLE_TYPE</td> <td>HOLE_LOG</td> <td>HOLE_CREW</td> <td>HOLE_EXC</td> <td>HOLE_SHOR</td> <td>HOLE_STAB</td> <td>HOLE_DIML</td> <td colspan="6">HOLE_DIMW</td> </tr> <tr> <td>PointID</td> <td>HOLE_FDEP</td> <td>HOLE_ORNT</td> <td colspan="12">HOLE_INCL</td> </tr> </tbody> </table> <p>Maps to the LocationDetails, DepthRelatedExploratoryInformation and OrientationAndInclination tables respectively in OpenGround.</p> <table> <tbody> <tr> <td colspan="8">GEOL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>GEOL_BASE</td> <td>GEOL_DESC</td> <td>GEOL_GEOL</td> <td>GEOL_LEG</td> <td>GEOL_GEO2</td> <td>GEOL_STAT</td> </tr> </tbody> </table> <p>Maps to the StratumDetails table in OpenGround</p> <table> <tbody> <tr> <td colspan="17">SAMP</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>SAMP_REF</td> <td>SAMP_TYPE</td> <td>SAMP_BASE</td> <td>SAMP_UBLO</td> <td>SAMP_WDEP</td> <td>SAMP_DIA</td> <td>SAMP_DESC</td> <td>SAMP_REM</td> <td>SAMPE_DATE</td> <td>SAMP_TIME</td> <td>SAMP_BAR</td> <td>SAMP_WDEP</td> <td>SAMP_TEMP</td> <td>SAMP_PRES</td> <td>SAMP_FLOW</td> </tr> </tbody> </table> <p>Maps to the SampleInformation table in OpenGround.</p> <table> <tbody> <tr> <td colspan="4">BKFL</td> </tr> <tr> <td>PointID</td> <td>BKFL_BASE</td> <td>BKFL_SYMB</td> <td>Depth</td> </tr> </tbody> </table> <p>Maps to the BackillDetails table in OpenGround.</p> <table> <tbody> <tr> <td colspan="6">CHIS</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>CHIS_TO</td> <td>CHIS_TIME</td> <td>CHIS_TOOL</td> <td>CHIS_REM</td> </tr> </tbody> </table> <p>Maps to the Chiselling table in OpenGround.</p> <table> <tbody> <tr> <td colspan="4">DETL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>DETL_BASE</td> <td>DETL_DESC</td> </tr> </tbody> </table> <p>Maps to the StratumDetailDescriptions table in OpenGround</p> <table> <tbody> <tr> <td colspan="24">ISPT</td> </tr> <tr> <td>PointID</td> <td>ISPT_SWP</td> <td>Depth</td> <td>ISPT_SEAT</td> <td>ISPT_MAIN</td> <td>ISPT_NPEN</td> <td>ISPT_NVAL</td> <td>ISPT_REP</td> <td>ISPT_CAS</td> <td>ISPT_WAT</td> <td>ISPT_TYPE</td> <td>ISPT_REM</td> <td>ISPT_INC1</td> <td>ISPT_INC2</td> <td>ISPT_INC3</td> <td>ISPT_INC4</td> <td>ISPT_INC5</td> <td>ISPT_INC6</td> <td>ISPT_PEN1</td> <td>ISPT_PEN2</td> <td>ISPT_PEN3</td> <td>ISPT_PEN4</td> <td>ISPT_PEN5</td> <td>ISPT_PEN6</td> </tr> </tbody> </table> <p>Maps to the SPT table in OpenGround</p> <table> <tbody> <tr> <td colspan="6">WSTK</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>WSTK_CAS</td> <td>WSTK_DATE</td> <td>WSTK_TIME</td> <td>WSTK_SEAL</td> </tr> <tr> <td>PointID</td> <td>Depth</td> <td>WSTK_NMIN</td> <td>WSTK_POST</td> <td colspan="2">WSTK_FLOW</td> </tr> </tbody> </table> <p>Maps to the WaterStrikeGeneral and WaterStrikeDetails tables respectively in OpenGround</p> <table> <tbody> <tr> <td colspan="8">CORE</td> </tr> <tr> <td>PointID</td> <td>CORE_BOT</td> <td>Depth</td> <td>CORE_DIAM</td> <td>CORE_PREC</td> <td>CORE_REM</td> <td>CORE_RQD</td> <td>CORE_SREC</td> </tr> </tbody> </table> <p>Maps to the Coring table in OpenGround.</p> <table> <tbody> <tr> <td colspan="13">DPRG</td> </tr> <tr> <td>PointID</td> <td>DPRG_ANG</td> <td>DRPG_RMSS</td> <td>DPRG_CONE</td> <td>DPRG_DAMP</td> <td>DPRG_DROP</td> <td>DPRG_MASS</td> <td>DPRG_REM</td> <td>DPRG_ROD</td> <td></td> <td>DPRG_TEST</td> <td>DPRG_TIP</td> <td>DPRG_TYPE</td> </tr> </tbody> </table> <p>Maps to the DynamicProbeGeneral table in OpenGround.</p> <table> <tbody> <tr> <td colspan="7">DPRB</td> </tr> <tr> <td>PointID</td> <td>DPRB_BLOW</td> <td>DPRB_DEL</td> <td>Depth</td> <td>DPRB_INC</td> <td>DPRB_REM</td> <td>DPRB_TORQ</td> </tr> </tbody> </table> <h2>Notes and Special Cases</h2> <p>In this mapping, the main majority of mapping is a simple 1 to 1 for each table and field. However, there are some exceptions which are worth noting;</p> <ul> <li>POINT <ul> <li>The Point table gets split into 3 different tables in OpenGround; LocationDetails, DepthRelatedExploratoryInformation and OrientationandInclination.</li> <li>A special function is used to extract the start and end dates in the correct format.</li> <li><span>DepthRelatedExploratoryInformation and OrientationandInclination - A constant value of 0 is entered for the depth top to simulate the top of the hole.</span></li> </ul> </li> <li><span>SAMP</span> <ul> <li><span>SAMP_DATE and SAMP_TIME are concatenated together if there is a SAMP_TIME record, else a value of 00:00 is used for the time.</span></li> </ul> </li> <li><span>WSTK</span> <ul> <li><span>WSTK_DATE and WSTK_TIME are concatenated together if there is a WSTK_TIME record, else a value of 00:00 is used for the time.</span></li> </ul> </li> <li><span>DPRG and DPRB</span> <ul> <li><span>TestNumber is a required field in OpenGround due to this being a key field, therefore a value of null is entered in the mapping in order to facilitate an import.</span></li> </ul> </li> </ul> <h2><span>How To Import</span></h2> <p><span>A gINT import mapping file can be imported into a configuration pack and be available for use in all projects on that configuration pack by following these steps;</span></p> <ol> <li><span>Open OpenGround Professional and select the System - Configuration Packs<br /><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636551318372v1.png" alt=" " /><br /></span></li> <li><span>Select the required configuration pack in the grid, then select Configuration Tools - Transfer Mapping -&nbsp;Upload Import XML Mapping<br /><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636551615834v2.png" alt=" " /><br /></span></li> <li><span>Select the File Format to be gINT, enter a name for the mapping and browse through the mapping file, then select iimport.<br /><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-06-06/pastedimage1636552016902v3.png" alt=" " /><br /><br /></span></li> </ol> <p><span>The mapping will then be available when importing data into a project in OpenGround Professional.</span></p> <h2><span>Download the File</span></h2> <p><span><a href="https://communities.bentley.com/cfs-file/__key/communityserver-wikis-components-files/00-00-00-06-06/UK-GINT-Example-File.xml">communities.bentley.com/.../UK-GINT-Example-File.xml</a></span></p><div style="clear:both;"></div> <div style="font-size: 90%;">Tags: import, gINT</div>