Settings

Stephen Evason — Tue, 31 May 2022 11:00:00 GMT

Current Revision posted to OpenGround Wiki by Stephen Evason on 5/31/2022 11:00:00 AM

The profile views created with the Interpretation commands are based on the defaults defined in the Settings command. The settings are saved within the current drawing.

Command: HBSI_HBSI_Settings

From the OpenGround Cloud ribbon Interpretation Panel press the Settings icon to display the Interpretation Settings dialog.

Profile View

Style: Profile view style to be used for the interpretation profile views
Band Set: The band set to be used for the interpretation profile view
Band by: Restricts the strata surfaces displayed to those matching the band by set; if band by is <Not Set> then all created strata surfaces will be listed.
Hatch sections: Specifies whether the strata bands will be hatched on the profile view

Projected Strips

Style: The geotechnical style to use for the log strips projected onto the profile view
Buffer Distance: The distance from which boreholes will be projected onto the profile view

Transparency

Selected stratum transparency: The level of transparency for the highlighted stratum hatch, between 0 and 100, 0 is opaque
Strata transparency: The level of transparency for the strata hatch areas, between 0 and 100, 0 is opaque
Offset strip distance: The distance away from the alignment for a borehole to be considered constrained, this means the strata profiles cannot be edited at a constraint borehole location. Non-constrained boreholes are displayed transparent

Profiles:

Selected Style: The profile style to use when a profile is checked editable
Style: The profile style used for all other strata profiles when interpretation is being edited.