How To Assign a colour to HoleBASE SI geology codes

wiki.author — Tue, 09 Jun 2020 23:08:20 GMT

Current Revision posted to gINT | Keynetix Wiki by wiki.author on 6/9/2020 11:08:20 PM

	Product(s):	Keynetix
	Version(s):	1.0
	Area:	Assist

How To Assign a colour to HoleBASE SI geology codes

Explanation

Assigning colours to Geology Codes can prove helpful when using templates which include a geological strip based on this field. A typical example might be the 'Default Section Log with Geology Code'.

Process

The following routine should either be performed within the Configuration Pack or with a specific project, depending on the applicability of the changes. This example follows the project method, although the steps are comparable for Configuration Packs.

Login to HoleBASE SI under a user account with an appropriate level of permissions to make configuration changes.
Open either the project or configuration pack, as appropriate.
Select 'Manage Picklists' (under the 'Configuration' ribbon when in a project).
Select 'Stratum Details - Geology Code' and click 'Edit'.
Select the required Geology Code and then 'Edit Image'. Browse to an image file; typically this might be a solid colour created in a third party application such as MS Paint.
Save the changes.

Note: when working in a project Geology Codes which are defined at that level will be coloured orange; these are the items which can be edited as desrcibed above at project level. Items which are not coloured will be derrived from the configuration pack and so must be edited at that level.

Tags: Migrated