Well/Installation not showing on log after entering Pipe Work data

wiki.author — Wed, 10 Jun 2020 00:44:03 GMT

Current Revision posted to gINT | Keynetix Wiki by wiki.author on 6/10/2020 12:44:03 AM

	Product(s):	Keynetix
	Version(s):	1.0
	Area:	Assist

Well/Installation not showing on log after entering Pipe Work data

Issue Summary

After entering Pipe Work data into HBSI you find the well/installation isn't drawn on the log output.

Resolution

If you find your Pipe Work data isn't showing, check that you have entered the data into the Monitoring Installations and instruments table.

When doing this ensure you set the "Distance" to be the base of pipe.
Make sure the pipe reference is set in both Pipe Work and Installations and Instruments tables.
Make sure a Instrument Type is set in the Installations and Instruments table.

Further Information

For further information please see this article on /cfs-file/__key/communityserver-wikis-components-files/00-00-00-01-05/6406.MissingImage.png and this article on Pipe Borders missing after Upgrading.

Tags: Migrated