This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple Storage pipe

Hi

According to the following link what if I have 3 storage pipe some thin like the following captured?

Note that, in the manual calculations I indicate the switching on-off table based on "minimum Volume Req for Cycling time=15xQxt", let give you an example:

design flow=0.4 m3/s , minimum cycling time=60sec ----> minimum volume for Cycling time=360 m3 ,

so I will see in the what elevation in the wet well I can get that volume (stored in the pipe and wetwell) then I will indicate the pump on level, but in the SewerGems user will indicate the on-off level without considering to these issues!

Thanks and look forward to hearing from you.

Hamid Akbari

 

https://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/19368.storage-volume-of-wetwell-and-pipe