This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

StormCAD for Autodesk 2014

I have loaded up an xref file on AutoCAD however, when I begin to create a network using the stormCAD tools in AutoCAD, the snap function seems to disable each time I try to draw the conduit over the x-ref. Any advice?

Parents Reply Children
  • I tried this here and it works. What are you snapping to?

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


  • Hi Terry

    Even when I try snapping to a polyline I must turn on the snap tool each time. I am able to draw the conduit and then snap it onto the polyline by moving the node but that's time consuming.

    It may be something to do with profile settings?

    Colm.
  • Colm,

    I don't believe we've seen this issue before so it is indeed possible that it could be related to a specific setting. It would also be helpful to know details such as the exact versions of AutoCAD and StormCAD and if this happens only with a specific drawing/xref or with any drawing (for example try one of the sample models with a separate, test xref.

    If you feel it is more efficient, it may be best to connect with technical support offline. A remote desktop sharing session may be necessary. We can then circle back to this forum post to share the solution.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

  • Hi Jesse,

    Thanks for the response. It would be good if we could set up a remote desktop sharing session as I am still having these issues.

    Kind Regards,
    Colm.