This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

StormCAD for Autodesk 2014

I have loaded up an xref file on AutoCAD however, when I begin to create a network using the stormCAD tools in AutoCAD, the snap function seems to disable each time I try to draw the conduit over the x-ref. Any advice?

Parents Reply
  • Colm,

    I don't believe we've seen this issue before so it is indeed possible that it could be related to a specific setting. It would also be helpful to know details such as the exact versions of AutoCAD and StormCAD and if this happens only with a specific drawing/xref or with any drawing (for example try one of the sample models with a separate, test xref.

    If you feel it is more efficient, it may be best to connect with technical support offline. A remote desktop sharing session may be necessary. We can then circle back to this forum post to share the solution.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Children