This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

StormCAD for Autodesk 2014

I have loaded up an xref file on AutoCAD however, when I begin to create a network using the stormCAD tools in AutoCAD, the snap function seems to disable each time I try to draw the conduit over the x-ref. Any advice?

Parents
  • Colm, a patch has been created to fix this problem in the latest build of StormCAD (08.11.05.58). If you are a SELECT user, it would be best that you create a service request on the Bentley site (under Support and Services) so that this patch can be sent to you if you are using the latest build of StormCAD.

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


Reply
  • Colm, a patch has been created to fix this problem in the latest build of StormCAD (08.11.05.58). If you are a SELECT user, it would be best that you create a service request on the Bentley site (under Support and Services) so that this patch can be sent to you if you are using the latest build of StormCAD.

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


Children