This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Time tolerance in Initial Setting Import -tool

Hello,

I'm testing the Initial Settings Import -tool in SCADAConnect simulator. I have the metering results of tank level from every 15 minutes (Excel) and I have made a SCADA Signal connection to the data. I'm using time tolerance of 5 minutes.

I tried to test how the 5 min time tolerance works by trying to import tank level value from time 00:15:00. If I have understood time tolerance right, I should get that value imported with Import Options (historical) being something between 00:10:00 - 00:20:00. However, the import only succeeds with a time between 00:13:00 - 00:20:00 (2 min before and 5 min after). The same thing happens with other metering times (00:30:00, 00:45:00 etc.) too. Why does the time tolerance function differently before and after the selected import time?

Regards,

Ulla K.

Parents Reply Children
No Data