This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Loadbuilder - WaterCAD/GEMS - Area Method

Dears 

Regarding the load builder:  i made a theissen polygon using a shape file as a boundary layer. then, i used a copy of the boundary layer shape file and assign attribute valve to it with the total demand m3/day using ArcMap.

Then in loadbuilder i used the area load method, prop. dist. by area and i used the new ArcMap - edited shape file as a flow boundry layer. and the theissen polygon as service area layer. 
the loadbuilder then shows an error messege "2 Id(s) do not match any id of the model."   

please, help me with this problem . 
Thanks in advance. 

Eng. M. Salem 

Parents
  • Hello,

    It might be useful to have screenshots of what you are seeing or a copy of the files so we can test this. If you opt to send the model, there are two options for sharing your model files on Communities. If you would like the files to be visible to other members, compress the files into a zip file and upload them as an attachment using the ‘Advanced Reply editor’ before posting. If your data is confidential, you can follow the instructions in the link below to send it to us via Bentley Sharefile. Files uploaded to Sharefile can only be viewed by Bentley.

    communities.bentley.com/.../7079.be-communities-secure-file-upload

    Please post here the with the name of the file. Make sure to include the model file as well as the shapefiles (and the shapefile supporting files).

    Regards,
    Scott
Reply
  • Hello,

    It might be useful to have screenshots of what you are seeing or a copy of the files so we can test this. If you opt to send the model, there are two options for sharing your model files on Communities. If you would like the files to be visible to other members, compress the files into a zip file and upload them as an attachment using the ‘Advanced Reply editor’ before posting. If your data is confidential, you can follow the instructions in the link below to send it to us via Bentley Sharefile. Files uploaded to Sharefile can only be viewed by Bentley.

    communities.bentley.com/.../7079.be-communities-secure-file-upload

    Please post here the with the name of the file. Make sure to include the model file as well as the shapefiles (and the shapefile supporting files).

    Regards,
    Scott
Children
No Data