This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

StormCAD and LandXML not working

Hi,

I have had the series 5 StormCAD installed recently however, the Trex function doesn't seem to load in landXML correctly anymore. The elevations are not coming in to the right coordinates. Can you please advise if this is an issue with the software? I previously didn't have any problems using Select Series 4.

Kind Regards,

Colm.

Parents Reply Children
  • Hello Colm,

    I am having hard time finding your model in our sharefolder.
    Could you please upload the model again, and give us the name of the uploaded file. Please zip the files together.

    Sushma.

    Regards,

    Sushma Choure

    Bentley Technical Suppport

  • Hi Sushma,

    I've uploaded a zip file again. File name is 'Bentley - LANDXML FIX' and contains two examples where the LandXML import does not work.

    1. Integration with ACAD example
    2. Select series 5 Bentley example

    Thanks,
    Colm.
  • Hello Colm,

    We still seem to be having difficulty receiving your files. To check that there was not a problem with the upload system, I used the same link and uploaded a test file myself and it worked.

    When you fill out the form, browse to and select your file, then click the "upload files" button, you should see a progress bar popup, and then a green box should appear, stating that the files were uploaded successfully. Are you seeing this popup and confirmation? We'll reach out to you privately with an alternative method if needed.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

  • Hi Jesse,

    Yes files have been successfully uploaded (Green bar appeared - please checked for file name is 'Bentley - LANDXML FIX'.

    Kind Regards,
    Colm.
  • Hello Colm,

    Thanks for uploading the files.
    There was defect in StormCAD SS5 for importing Landxml files using TRex, which has been fixed with the patch. When I applied the latest patch for StormCAD SS5, I could import the elevations without any error.
    I request you to please submit a service request for this, so that we can provide you the patch. After applying the patch you should be able to import the Landxml file using TRex without any error.

    Regards
    Sushma Choure
    Bentley Technical Support.

    Regards,

    Sushma Choure

    Bentley Technical Suppport

    Answer Verified By: Jesse Dringoli