This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SWMM Interface Files

I'm currently running a rather large model that has somewhat extensive hydrology, and I was looking at the option of using the SWMM interface files (rain file, runoff file, RDII file) to save the hydrological results so I don't have to rerun them every time I run the model.

In the calculation options I have it set to save the results for all 3 of these and have specified the file path, but after running it doesn't seem to save anything to this location. I'm assuming if I have it set to save it should save the results in the location I specify and then in future runs I can change this field to "use" to use the results that were previously calculated.

I can find very little information on these features for use in SewerGEMS. Do I have it set up right? Has anyone else encountered problems in using this feature?

Thanks,

David

Parents Reply Children
  • Hello David,

    Could you send us the files you have? There are two options for sharing your model files on Communities. If you would like the files to be visible to other members, compress the files into a zip file and upload them as an attachment using the ‘Advanced Reply editor’ before posting. If your data is confidential, you can follow the instructions in the link below to send it to us via Bentley Sharefile. Files uploaded to Sharefile can only be viewed by Bentley.

    communities.bentley.com/.../7079.be-communities-secure-file-upload

    If you upload the files to Sharefile, please post here with the name of the file so we know it is available. Include any rain data you already have with the model as well.

    Regards,
    Scott