• State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 1152 views
  • Users 0 members are here
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hi

Venkatesh R Sheshappanavar
Offline

After generating a profile, if any element is added along that stretch the profile is not available in the "Transient Results Viewer" after running the Transient analysis (where we review the vapour volume, Hydraulic Grade etc.) Please do help on this.

Parents
  • 0 Offline
    You will need to edit the profile. Go to View > Profiles. If you right-click on the profile that you are using and then select "Edit", it will prompt you with a dialog box stating, "Some elements reference by this profile no longer exist( likely due to a delete, link split-up or morph operation). Would you like to auto-repair the profile, so that you can continue to use it?" Answer yes to the prompt.

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


    Answer Verified By: Sushma Choure 

Reply
  • 0 Offline
    You will need to edit the profile. Go to View > Profiles. If you right-click on the profile that you are using and then select "Edit", it will prompt you with a dialog box stating, "Some elements reference by this profile no longer exist( likely due to a delete, link split-up or morph operation). Would you like to auto-repair the profile, so that you can continue to use it?" Answer yes to the prompt.

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


    Answer Verified By: Sushma Choure 

Children
No Data
Communities
Support and Services
Training and Learning
Social Media