Dear All;
I am modelling storm water network ( Check Attached Model and screen shots). I have the following question.
1- In screen shot capture-2 spread of water in gutter at the end is 2.3 m while depth (out) is 0.0464 m .... how this happen with road cross slop of 1.5%???. please note that flow at the end of GU-1 equal the sum of flow bypassed from CB-1 = 5.742 l/sec and flow of catchment area CM-2 = 16.271 l/sec so, total flow at end of this gutter = 22.011 l/sec.
New folder (3).zip
I'm not sure why your results are not updating when the road cross slope is changed. I noticed you're using an old version of the program (V8i SELECTseries 3), but I tried using that version and could not reproduce the problem. I tried both build 08.11.03.77 and 08.11.03.84 (both SS3) with similar results. See below video to show what I see. If this does not help, please send a new copy of the model in case something was changed. Also confirm if you've applied any patches to your StormCAD and if you have the option of upgrading to the latest version.
Regards,
Jesse DringoliTechnical Support Manager, OpenFlowsBentley Communities Site AdministratorBentley Systems, Inc.
1031.New folder.zipDear Jesse
I run the the model using storm series 4 and problem still appear.
I have attached the model .
regards