This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to convert a manhole into a bend in SewerCAD?

Using ModelBuilder, I imported shapefiles and created a sewer model. I am in the process of adding more data.  I realized that many sewer pipe bends and connections became manholes. I'd like to remove these false manholes and make it as a bend. Is there a simple way to do so?  I could re-create a new conduit and bend it, but I will lose all the information I imported for the conduits.  Please let me know if there are simple ways to work around this.  Thank you.

Yoko

Parents
  • You could use the Batch Morph tool (Tools menu) to morph a selection set of these manholes into transitions, though you will need to enter the Top Elevation afterwards. You may want to take a look at your source shapefile. Each segment may be a separate line element instead of one continuous polyline. If it's not too late, it might be best to clean up the source file first.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows Products
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

    Answer Verified By: Yoko 

Reply
  • You could use the Batch Morph tool (Tools menu) to morph a selection set of these manholes into transitions, though you will need to enter the Top Elevation afterwards. You may want to take a look at your source shapefile. Each segment may be a separate line element instead of one continuous polyline. If it's not too late, it might be best to clean up the source file first.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows Products
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

    Answer Verified By: Yoko 

Children