Might need a refresher here, but on hour 0:00 below, why is the solution running 101 trials to an accuracy of 0.000066 when the specified convergence accuracy is only 0.001? On the next time step, it only take 3 trials? The "yellow" feedback is that the max trials are exceeded and the system may be unstable. Thanks
Fixed the issue by going through and making some small geometry changes. I think I fixed it when I eliminated two pipes connecting directly to a tank (I've always considered that an issue when troubleshooting past models). Now, I'm down to 10 trials. Didn't use the "advanced reply editor" last time (new to this), but have attached updated graphic. Just to reiterate, that 0:00 line was 101 trials previously with a convergence accuracy well below 0.001