Dear Gentlemen;I try to import *.inp model prepared by InfoSWMM to Bently SewerGems, unfortunately import cancelled when reach "assign pipe geometry" kindly advise on the solution
Please see the below link for the error snapshot
https://we.tl/tDPFCu7wOD
Hello,
It looks like the .INP file is having issues itself with the pipe geometry.
Could you please check the model first in EPASWMM or InfoSWMM from where you are exporting the model and check for data entry errors. The model have to be complete in terms of the geometry,connections to be imported into SewerGEMS.
So far we have seen below mentioned issues with the .INP import.
Problems with importing .INP files
Regards,
Sushma Choure
Bentley Technical Suppport
Thank You Sushma, your reply led me to solution, I have exported the model from infoSWMM as .inp file, then I open it successfully in SWMM5.1. But when I tried to open in it in Bently SewerGems it was imported smoothly but I got this shape ( as per snapshot via below link)
https://we.tl/xczE3YceLn
Hello Huthyfa,
After you export the model to an INP file in InfoSWMM, make sure you then open the INP file in EPA SWMM5.1 and save it. After doing that, try to open or import the INP in SewerGEMS. If that doesn't help, then please provide the INP you exported from InfoSWMM for us to test with using one of the options explained in this article. Also provide the SewerGEMS version number you are using (explained here).
Craig Calvin
Bentley Technical Support
Answer Verified By: Huthyfa Ahmad
Thank You Craig,
I got it solved by exporting InfoSWMM model as *.inp, then I have opened the file in EPA SWMM 5.1 and Save it as different name, when I opened it in SewerGEMS SelecetSeries 5 it worked successfully
Based on the discussion on this forum, here is the relevant wiki article;
Catchment geometry lost when importing model prepared in InfoSWMM
Yashodhan Joshi