This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Modelling StormWater Attenuation Tank With Outlet Pumps

Hi;

I am trying to model storm water attenuation Tank with outlet pumps (50 liter per second) in civil storm and I assumed a certain volume for the tank. My expectation that the software shall inform me if the assumed volume is Okay or no, but unfortunately. I did not get any messages also there is no flow outlet from the pond what could be the reason for this. I have attached the model for your review.

files under below link

drive.google.com/open

  Regards

Sayed Elhagar