I currently have a drainage area contributing 32,000 gallons to a pond. However, the pond only ever fills up to 5,000 gallons. There is no outflow out of the pond, because the water surface never reaches the weir. Does anyone know a good reason why the pond is not filling up? The flow continuity error is low(.5%) and other ponds in the model work as intended.
Hi George,
It would be helpful to look at your model. Please upload it using one of the methods in the following article.
Sharing Hydraulic Model Files on the Haestad Forum
Regards,
Craig Calvin
Bentley Technical Support
Thanks for your reply Craig. Unfortunately I can not post the model on the forum.