This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Showing Profiles and Graphs in Civil Storm

Hi,

Is there away to make the time step jumps directly to the time of max HGL on a profile view. I can see the red tick marks of the max HGL but I want the simulation to jump and pause at that time?

thanks

Parents
  • Hello,

    You can drag your time browser to the time which you wish to see (where your HGL tick marks are visible) and pause. If your HGL tick marks are occurring at regular intervals you can set the interval time in the Time Browser.

    Hope this helps.


    Regards,

    Yashodhan Joshi

  • can CS automatically jump to the time step with max HGL. I want to drag or pause nothing to get there

  • No, the profiles cannot automatically jump to the time with with max HGL; that time may be different for all elements in the profile. You can view the "time to maximum hydraulic grade" property to help locate a suitable time to look at for a particular element of interest that is included in your profile.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

    Answer Verified By: A  

Reply
  • No, the profiles cannot automatically jump to the time with with max HGL; that time may be different for all elements in the profile. You can view the "time to maximum hydraulic grade" property to help locate a suitable time to look at for a particular element of interest that is included in your profile.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

    Answer Verified By: A  

Children