Dears,
A topic for discussion which was once raised but didn't seem to have concluded except for reference to use the most recent release of the software which may or may not be related to the causes... anyhow, the difference in this post is that we have a suspected case which model will be provided to be investigated ... then may be we can conclude a couple of lessons learned out of the exercise.
The main drivers are:
1. Is there anything suggesting instability in the profiles views?
2. how would you go about verifying that in the actual model? (time steps / continuity errors/ hydraulic results reviewer / what else to look for)
3. Then ultimately, is it acceptable and would you argue against any other views?
P.S: model sent via secure file
Thanks