StormCAD/Pond Pack

Hello all,

The connecting channel and gutter length in model matters the pipe design or (channel/gutter).OR, these elements were just to route the flow?

Please, find the following attachment.

Also,

In pondpack, I am not able to print out the details that I setup in combined structure.

For example, orifice elevation, riser elevation, no.of orifice used, culvert elevation, culvert length etc.Is there anyway to printout these results?

Help me to solve these problems.

Thank you,

Hari

Parents
  • Hello Hari, 

    Do you mean that you are not able to print the culvert details inside Composite outlet structure? 

    Do you want to see the results individually for culvert, orifice or for the entire composite structure which consists of orifice and culvert etc. 

    If you click on Composite structure, then you can generate a report of that which will have information about culverts and orifices within that. 

    If this is not what you are looking for then please elaborate your query. 

    Regards,

    Sushma Choure

    Bentley Technical Suppport

Reply
  • Hello Hari, 

    Do you mean that you are not able to print the culvert details inside Composite outlet structure? 

    Do you want to see the results individually for culvert, orifice or for the entire composite structure which consists of orifice and culvert etc. 

    If you click on Composite structure, then you can generate a report of that which will have information about culverts and orifices within that. 

    If this is not what you are looking for then please elaborate your query. 

    Regards,

    Sushma Choure

    Bentley Technical Suppport

Children
No Data