I have a water system with three-point of connections.

Question

I have a water system with three-point of connections. The system is connected to a Master Water System (existing) and the owner send to us three values, Pressure psi and flow GPM. How can I model this?

Sushma Choure · Answer

Hello Migdalia, 
 You can model connections to an existing system if you have skeletonized version of new development in best way. However you can also model this connection using reservoir and pump element, how to do that is explained in below mentioned wiki. 
 Modeling a Connection to an Existing System 
 However modeling multiple connections is viable only in cases likes if there are separate, disconnected systems upstream of each connection point, modeling multiple connection point may be fine. 
 Here is similar forum discussion for your reference. 
 Modeling Large Development with Multiple Connections.