Color coding is not working in WaterGEMS. Model is not picking up that I am color coding elements and it is not picking up the size for the color coding. I tried closing and opening the model but it's still not working. What could the issue possibly be?
What is it you are trying to color code in your model? We have not had anyone else report this as an issue in the product, so it would be useful to have a copy of your model to analyze. Please upload a copy following these instructions.
We will reply back to this thread after we have looked at your data.
Please see attached screenshot. I am just trying to color code a selection set of pipes. I have never experienced this problem before so I am just as surprised.
Hope to hear back from you soon.
Try the below steps for troubleshooting;
1. Synchronize the drawing. Go to File > Database Utilities > Synchronize Drawing.
2. Compact Database. In Database Utilities go to Compact Database. See the reference article for this here.
3. Separate the model files (.wtg and .wtg.sqlite) from the folder where this model is saved. Copy these files and save it to a separate location. Now open the model from there. See if it helps.
If the above options do not help we would need to take a look at the model files for testing. See the below article for guidance on sharing model files over the forum;
Sharing Hydraulic Model Files on the OpenFlows | Hydraulics & Hydrology Forum
Bentley Technical Support
To add to Yashodhan's suggestions:
Jesse DringoliTechnical Support Manager, OpenFlows ProductsBentley Communities Site AdministratorBentley Systems, Inc.
This is valuable information and it helped resolve the issue. Thank you so much Yashodhan and Jesse.