This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Air Valve Ingress/Egress Flowrates

I have a question regarding the TechNote on Air Valve elements. (https://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/3400/modeling-reference---air-valves)  

Specifically the section on Reporting and the Transient Analysis Output Log.  I see this provides results for the CURR. FLW# which is defined in the note as the flow through the end point at the end of the transient simulation (last time step, current flow).  Is this information available somewhere for different time steps in the calculation?  Interested in learning the maximum flowrate of air into and out of an ARV during the simulation.  Is this information available in the reporting somewhere?  I assume this is the information provided in the Transient Analysis Output Log?  But this information is air flow in the pipeline and not free-air at the valve opening?

I also found a previous discussion on this topic that is now locked (https://communities.bentley.com/products/hydraulics___hydrology/f/haestad-hydraulics-and-hydrology-forum/145265/follow-up-to-service-request-7000721384-pertaining-to-air-ingress-velocity/441438#441438) which mentions potential future enhancements to directly report free-air flowrate and velocities.  Has there been any updates to address this enhancement?

Thanks,

Brian