This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hammer

Dear all,

I would like to know: is there any method to select more than one column in flexTables (Hammer 10.01.01.04)?

Also, to select a column in flexTables (Hammer 10.01.01.04) you must click right on the desired column then copy (Ctrl C is inactive) , is there any other method?

Best Regards,

Moustafa Darweesh

Parents
  • Hi Moustafa,

    A few tips:

    1) You can select a range by navigating while holding down the shift key (this is a fairly common behavior in Windows applications).

    2) You can hold the [Ctrl] key and press the [Down] arrow key to navigate to the last cell in the current column (right, left, up work similar).

    So, if you want to select 3 columns starting here:

    Hold down the [Shift] key and press the [Right] arrow key twice:

    Finally, while still holding the [Shift] key, press [Ctrl]+[Down]:

    Best regards,

    Rob.

  • Dear Rob,

    Thanks for your reply.

    I think this method is true if the columns are adjacent to each other.

Reply Children
No Data