Hi,
I recently got a new error that I had not seen before: "Pump fixed target flow is too low to require the pump to operate." Is there a comprehensive list of user notifications and their meanings anywhere that I can look to for an explanation of any user notification?
Thanks,
Nastassja
I recently got a new error and I am wondering what it means: "Pump fixed target flow is too low to require the pump to operate."
Hi Nastassja Abercrombie,
The user notification you report occurs in a sample model for me when the fixed flow setting is zero. Is this is the case for you?
It might be helpful to see your model. Please upload using these instructions.
Thank-you,Larry
No my flow setting is 500 gpm. I guess I just thought with a fixed flow, the target flow rate could never be too low as long as like you are saying it is greater than 0.
Hello Nastassja,
It would be useful to see a copy of the model files for this. Testing in sample models on our end shows this message occurs with a fixed flow setting of zero. This could occur with other flows depending on the setup of the model. Seeing what is happening in your model may help give us an understanding of what is happening in your specific case.
Regards,
Scott