This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SewerGEMS Best Way to Connect Conduits to a Channel?

I am working on a stormwater modeling using SewerGEMS, and I will need to connect a couple of conduits to a channel element (see simple diagram included). I am hoping that someone could show me what the best way to connect these conduits to a channel is. I am new to using channels in SewerGEMS and want to make sure I get this channel set up correctly. It looks like I will need to have at least one cross section to define my channel (it is a uniform channel, so only one is needed unless it is better to use more than one). Each of the conduits will have an end section where they dump into the channel. It looks like I could use either a headwall or an outfall on the end of my conduits. My question then is how to get my outfall/headwall connected to the channel? If someone could set up a diagram similar to what I have provided using SewerGEMS elements that would be great. Thanks!