This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How do you export multiple minor loss coefficients into a library? They currently have no library source.

I need to export 100+ minor loss coefficients that do not have a current library source. Is there a way to do it other than individually one at a time?

Parents
  • If you do really have a need to re-use 100+ minor loss coefficients in other models, another approach to consider is a seed file. If you have a model that already has all of the desired minor loss coefficients in the minor loss coefficients manager, you could remove all elements in the drawing, configure other parameters like units, standard symbology, etc, then go to File > Seed > Save to Seed. Then when you want to start a new model using these standards, instead of using the New button you would use File > Seed > New from Seed, then select your template seed file. See more: Seed file / Model Template


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Reply
  • If you do really have a need to re-use 100+ minor loss coefficients in other models, another approach to consider is a seed file. If you have a model that already has all of the desired minor loss coefficients in the minor loss coefficients manager, you could remove all elements in the drawing, configure other parameters like units, standard symbology, etc, then go to File > Seed > Save to Seed. Then when you want to start a new model using these standards, instead of using the New button you would use File > Seed > New from Seed, then select your template seed file. See more: Seed file / Model Template


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Children
No Data