I am creating a drainage system which at some point drains into perforated pipes.
How can i model a perforated pipe?
Hello Sepideh,
For this purpose you can use the Explicit (SWMM) solver (selected in the calculation options) > groundwater module. The aquifer can be defined under Components > SWMM Extensions > Aquifers.
Here is information on these SWMM extension and modeling aquifer.
How to model aquifers in SewerGEMS and CivilStorm using the SWMM solver
Please see below similar forum detailed discussion on modeling perforated pipes, for your reference.
Ground Water Lowering by perforated Pipes
Regards,
Sushma Choure
Bentley Technical Suppport