Integrating StormCAD into MicroStation Connect

Question

I just loaded up StormCAD Update 3 (10.3.4.53). I need a little assistance getting it integrated with MSCE Update 15 (10.15.02.011). 
 We are running MSV8i & MSCE using a shared workspace on a network. The switches in the program icons appear a little different than those for V8i - for good reason. Can someone tell me which switches are pointing where? Thanks.

Scott Kampa · Answer

Hello Ray, 
 We have updated this link to include information on loading OpenFlows products into a custom workspace: Loading Hydraulics and Hydrology products into a custom workspace . 
 The workflow is similar to the old methodology in that you will edit your custom workspace CFG file to include code from the StormCAD.cfg file. Once you have done that, you should see StormCAD functionality in your custom workspace. 
 Regards, 
 Scott

Scott Kampa · Answer

Hello Ray, 
 The code looks a little different in my installation. I was able to get it to work in an example workspace. To do this, I browsed to C:\ProgramData\Bentley\MicroStation CONNECT Edition\Configuration\WorkSpaces\OpenFlows\Worksets and opened the CFG for the OpenFlows product. I selected everything in the file and copied it. 
 Next, I browsed to the location for the workspace being used in MicroStation CONNECT Edition and opened it. I went to the bottom of the page and just pasted the OpenFlows code. After saving, I opened MicroStation and was able to see my OpenFlows ribbon items being available. 
 Regards, 
 Scott