This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Export Project to Excel - All EPS Timesteps are Exported

WaterCad 10.03.01.08 64 bit

I've got a very small model (12 pipes, 2 pumps) I'm using to simulate a small force main system.  I've set it up as an EPS run.

When I export the model (File --> Export --> Excel) ALL EPS timesteps are exported, but I only want several timesteps exported.

I know I can select a timestep in "Times", then open up Flextables for the various elements and export to CVS from there, but that's a lot of work, and I'm lazy.

Is there a way to have Watercad export all element data for only 1 timestep using the File --> Export option?

TIA.

Parents Reply
  • Thanks Jesse!  That's exactly the solution I was hoping to find.

    Note to anyone planning on using this option:  If you want the reporting to stop at a certain time (i.e. - say you have a 24 hour EPS run but want to stop reporting after 5 hours) you MUST do the following:

    1) Set the final ">= Hydraulic Time (hours)" entry in the "Reporting Time Steps" dialog box to the time you wish to stop recording

    2) Set the "Type" for this last entry  to "<None>"

Children
No Data