This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WaterGEMs export to EPANET

I have a model in WaterGEMS and I am attempting to transfer to EPANET. The issue I have is the transfer only includes nodes and tanks. The pumps, valves and pipelines will not transfer to EPANET.

Parents Reply
  • Hi Joaquin, that message indicates a failure occurring during the export process. I would suggest using the Validate tool to check for any problems with the model that the EPANET export is getting stuck on, and make sure you're using the latest version (10.03.05.05): Downloading OpenFlows Software 

    You will see a note in this article about a specific known issue in version 10.03.02.75 causing that exact error on export, if a hydropneumatic tank is included in the model. If that is the situation, you can remove the hydropneumatic tank or convert into an equivalent regular tank element in order to export.

    If you need further help, please provide a copy of the model for review: Sharing Hydraulic Model Files on the OpenFlows Forum


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Children
No Data