This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pressure Reducing Valve on Transmission Line

Dear Bently Team, 

I am designing a water supply system. System consists of 100 km pipeline. Dam is the source of water, transimission line will supply water from Dam to a reservoir at down through gravity. The difference between normal level and lower water level of Dam is150m. Can I install Pressure reducing valve at upstream and set my hydraulic Grade level at the lower water level of dam so that pressure doesn't exceeded in the pipeline. 

I am looking forward to your reply 

Thanks and Regards,

Syed