This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Civil Storm. Connecting two rainwater drainage systems with two separate Outfalls

Hello,

Recently I am modeling two rainwater gravity drainage systems with two separate Outfalls. My task is to connect them together and to analyze the hydraulic flow distribution after the connection.

My question is: is there any suggestions or rules for selection of the connecting element?

Which link element should be used for this kind of connections? Can these systems be connecting with the same element that is used in the system, for example Conduit?

Is there any known routine how to model this kind of connections? And what should be considered during the modeling?

Parents
  • Hello,

    Are you trying to ascertain the combined flows from the two systems at this point?

    If that is the case then you can simply put both the rainwater gravity drainage systems into one "outfall". If you are using conduits, you can have two conduits representing the end connections from your two systems terminating into a single outfall.

    Something like this;

    Does this help?


    Regards,

    Yashodhan Joshi

Reply
  • Hello,

    Are you trying to ascertain the combined flows from the two systems at this point?

    If that is the case then you can simply put both the rainwater gravity drainage systems into one "outfall". If you are using conduits, you can have two conduits representing the end connections from your two systems terminating into a single outfall.

    Something like this;

    Does this help?


    Regards,

    Yashodhan Joshi

Children