This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reference to a deleted or inactive condition element

Hi,

I have a bunch of errors for reference to a deleted or inactive condition element and reference to an inactive action element. How do I resolve these?

Nastassja

Parents
  • Hello Nastassja,

    These user notifications point to your controls. Check your controls, conditions and actions and see if any of then refer to inactive elements (E.g. a control setup for a pump to switch "On" or "Off" but the pump itself is inactive) or your controls are calling to deleted actions.

    You can double click the user notification and check which controls are problematic.


    Regards,

    Yashodhan Joshi

    Answer Verified By: Nastassja Abercrombie 

Reply
  • Hello Nastassja,

    These user notifications point to your controls. Check your controls, conditions and actions and see if any of then refer to inactive elements (E.g. a control setup for a pump to switch "On" or "Off" but the pump itself is inactive) or your controls are calling to deleted actions.

    You can double click the user notification and check which controls are problematic.


    Regards,

    Yashodhan Joshi

    Answer Verified By: Nastassja Abercrombie 

Children