This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pressure Zone Analysis

Hello,

I have a fairly complex model with ~46 pressure zones. I used the Pressure Zone Analysis Tool to color code the zones. However, there is one particular area that seems like it should be its own zone, but the model isn't separating it. There is either a PRV or closed TCV on all "inlets/outlets" of the zone. There is no 'color-break' across two of the valves, indicating the pressure zone boundary is open. Any tips or suggestions? Can I send you my model file so you can take a look?

example of one of the valves: 

Thanks,

Jose