Problem starting the SewerGEMS

Jefry,

Here are some initial troubleshooting questions for you:

1. Does this error appear when opening SewerGEMS itself, or when opening a model?
2. Did the problem suddenly start occurring or did something recently change? (new installation, upgraded version, new model, etc)
3. What version of SewerGEMS are you using? (if you are able to, check under File > Help > About). The latest version is currently 10.03.04.53 and you can find information on upgrading here. If you are not already on the latest version and are able to upgrade, it is recommended.
4. If it happens when opening a model, does it happen with every model? (try opening one of the sample files included in the Samples folder within the SewerGEMS installation folder)
5. If the error occurs with a specific model only, try copying only the .STSW and .STSW.SQLITE files to a new folder on your local hard drive and try again (this will help rule out problems with output files or other supporting files). If this does not help and the problem is model-specific, please provide a copy of the model: Sharing Hydraulic Model Files on the OpenFlows Forum
6. If the error occurs with any model or when opening SewerGEMS itself (before opening a model),
   1. What are the specific steps taken to open SewerGEMS? (just the desktop shortcut?)
   2. Have you tried restarting your computer or reinstalling SewerGEMS? (or a clean reinstallation per the steps here?)
   3. If you are able to access the menu items, try resetting the workspace per the steps here.
   4. If your Windows regional/language options are not set to US/English, are you able to temporarily try changing them as a test to see if it helps resolve the issue? 

Jesse,

1. Appears when opening the model.
2. It started suddenly.
3. Version 10.00.00.40 64 bits.
4. It happens with all models.

Thanks for the information. Does it happen with the sample models, too?

10.00.00.40 is an old version from about six years ago. Are you able to upgrade?

Did you try any of the other things mentioned in my previous reply?

I already restarted the PC, I already reinstalled the program and it didn't solve the problem.

Jesse, It also happens with test models.

If I can update, I will have to update the version and see if it solves the problem

Did you try resetting the workspace?

Did you try a clean reinstallation?

Please check your Windows updates to see if you see any .NET Framework updates or CONNECTION Client updates listed recently. Also let us know if you recall any other recent changes to your system that happened just before the problem started occurring.

Please also provide a copy of your log file in case there are any other clues: Locating OpenFlows product error log file

If at all possible try upgrading, as the version you have is quite old and may have some incompatibility with a recent update.

Did you try resetting the workspace?

Did you try a clean reinstallation?

Please check your Windows updates to see if you see any .NET Framework updates or CONNECTION Client updates listed recently. Also let us know if you recall any other recent changes to your system that happened just before the problem started occurring.

Please also provide a copy of your log file in case there are any other clues: Locating OpenFlows product error log file

If at all possible try upgrading, as the version you have is quite old and may have some incompatibility with a recent update.