Hello everyone.
I have User User notification message id 41891 with my hidraulic model .
Please help me to resolve that. Tnaks all
I WILL UPLOAD THIS FILE HERE www.transfernow.net/.../20230118QlvxNAVo
I believe error 41891 is "Pressures below the lowest physically possible" (please confirm). If so, this message is telling you that the pressure somewhere in your network is not only below zero, but below the vapor pressure limit and therefore the results are not valid. Please see the following article for help on troubleshooting negative pressures: Troubleshooting negative pressures at pumps, junctions, & other node elements
If this does not help, please provide the complete set of model files as Scott mentioned, plus details on the message you are seeing and any other specific steps to reproduce.
Regards,
Jesse DringoliTechnical Support Manager, OpenFlowsBentley Communities Site AdministratorBentley Systems, Inc.
Hello Humberto,
Only the .wtg file is included. Please go to File > Save to Package to create a zip file with the files we need. This link has information on getting the files over to us: Sharing Hydraulic Model Files on the OpenFlows
Scott